Home | Contact Us | Submit Troubleshooting Info | Search | Help


    Output | Software Solutions | Proofing | Color, Screening and Calibration | Scanning | Digital Photography | Consumables | POS

Table Flotation Not Working

Applies to

 ThermoFlex

Description

Media will not float on table surface when table float button is on.

Causes

 One or more table fans not working properly.

Solutions
  • Open table and visually check to see if fan blades are spinning when the float button is pressed.
  • If not, check to see that fan is getting power by pulling the backshell connectors at the fan apart and measuring the voltage at the connector. If the fans are not getting power, check the fan relay.
  • If the fans are getting power and are not spinning, replace the fan.

    Copyright © 2005 Creo Inc. All rights reserved. Confidential. Back to top.