Product

ThermoFlex Wide II

Machines affected

All

Error

The Head collides with the side of the Garage block or Arbor.

Cause

• The side-looking sensor on the debris removal nozzle fails.
• The carriage stage does not return to the home position before receiving instruction to move to the park (garage) position.
• The garage block is bent out of shape from a previous collision.
• The firmware is causing the error.

Solution

• Confirm that the side-looking sensor is functioning properly.
• Confirm that the home tab of the carriage stage is properly adjusted.
• Confirm that the garage block is in good shape.
• Confirm that the firmware is instructing the carriage stage to be fully back before moving the carriage to the park position.

Technical contact(s)

Gary Edge

Submitted by

Bob Magyar

Date submitted

10 Oct 2003