Home | Contact Us | Submit Troubleshooting Info | Search | Help
Output | Software Solutions | Proofing | Color, Screening and Calibration | Scanning | Digital Photography | Consumables | POS
Home | Contact Us | Submit Troubleshooting Info | Search | Help
Output | Software Solutions | Proofing | Color, Screening and Calibration | Scanning | Digital Photography | Consumables | POS
Cable, power distribution board (PDB) to drum amp (power)
Part number: 10-4842A
Where used: All MCE devices
Description
A cable that connects the IDS 1100 drum amp on connector P1 that brings 240 V of AC power over to phases L1, L2. L1 is controlled by the relay K1. A 50-ohm, 55-watt shunt resistor protects the drum amp.
Drawings
FCOs
CA02565: Introduces version B of the cable because the shunt resistor was replaced from a 50/50W to a 50/55W to allow better surge protection.
