FCO E114

Field Change Order #E114

Applies to	TS3244 (TS8 based) Trendsetter Proofsetter TS2637 TS3230(TS4)	Priority = N/A Reason = Manufacturing Release date = April 2001

Machines affected	Implemented, beginning at serial number TE242 - Trendsetter PX072 - Proofsetter All newspaper machines 100 Label change # 12 on TS8 and #5 on TS2637
Components	Power Box SCSI cable
Problem	Have two versions of power boxes (11-0603 & 11-0872) in production: one for Base & Spectrum and one for Autoloader & TS2637. The shielded ribbon SCSI cable is unreliable.
Solution(s)	Standardize on one version of power box, 11-0872. Equip TS8 manual load engine (#50-1672A) with a high-speed drum motor and stepper carriage motor. Introduce new internal molded SCSI cable 10-4057B NOTE: Machines ship with Firmware version 2.51b with the following NVS Changes.
Parts needed	To replace SCSI cable: Upgrade kit 05-0219 BOM
Tools needed	N/A
Procedure	To change SCSI cable: Remove 2 hex screws (J15) on non-connector side of backplane (10-4298) that hold SCSI cable on the board. Remove old SCSI cable (10-4057A). Plug new SCSI cable (10-4057B) into J15. Attach spacers and screws provided in the upgrade kit. See Insert A on Drawing 10-4298AB. Spacers go on connector side of board.
Technical contact	Simon Cheung