Home | Contact Us | Submit Troubleshooting Info | Search | Help


    Output | Software Solutions | Proofing | Color, Screening and Calibration | Scanning | Digital Photography | Consumables | POS

Subscan or mainscan scale errors

Applies to
  • Trendsetter 3244
  • Platesetter 3244
  • Trendsetter 3230 (TS4 Version)

Description

Subscan or mainscan scale errors in the same plot, plotted one after another

Causes

Solutions

 Check the carriage drive system.
Check that the ballscrew pulley, and especially the ball screw stepper drive pulley is secured to the shaft, and that the drive belt is not damaged. Replace and/or reassemble as necessary.

Check for faulty thermistors or cable.

    Copyright © 2005 Creo Inc. All rights reserved. Confidential. Back to top.