mag_sensor- old style

Determines if the trailing edge (TE) clamps are on the actuator.

ms

1

"

"

load_plate_sensor

See FCO E897. Part number changed on FCO E312. See

Checks if a plate is on the load ramp and verifies the size of the plate as it is loaded.

lps

1

roller_sensor

Checks roller position. Also ensures that the roller is not in the "no fly" zone before spinning the drum.

rs

1

te_lock_sensor

Senses whether the TE clamps are locked or unlocked before attempting to place them on or remove them from the drum.

tl

1

te_sensor

Checks position of the Trailing Edge (TE) actuator. Also ensures that the TE actuator is not in the "no fly" zone before spinning the drum.

te

1

le_sensor

Checks position of the Leading Edge (LE) actuator position. Also ensures that the LE actuator is not in the "no fly" zone before spinning the drum.

le

1

load_ramp_sensor

Verifies that the load ramp actuators have successfully moved to the desired location. Also ensures that the load ramp is not in the "no fly" zone before spinning the drum.

lrs

1—enables the top and bottom load ramp out (AWAY from drum) sensor

exit_sensor

Checks whether the exit door is open or closed

es

1

check_flyoff (base)

Checks for objects in the area below the clamp actuators

drum chkfly

1

check_flyoff (Spectrum)

Checks for objects in the area below the clamp actuators

drum chkfly

1