Trendsetter AL -FCO D123

Field Change Order #D123

Machines affected	Up to and including SA138
Component	Warning Light Driver assembly
Problem	ECO C546 released the new Warning Light Driver assembly with a retrofit Kit # 05-0071 for all machines in the field. (#11 on the 100 Label) Then ECO C699 released a new (50-1522A) Interface Brd Assembly with a new Corner Light Driver Relay attached.
Solution(s)	The retrofit Kit # 05-0071 contains a bracket and relay to protect the TEE board from a warning light bulb failure.
Parts needed	Kit # 05-0071: 10-3987B cable assy 57-4881A mounting bracket 10-4037A cable, LMP relay - TEE (J24), TS4 AL 52-3057 washers (qty 2) 52-3252 screws, M3x8 (qty 2) 36-3156 warning lamp, 24V (qty 2)
Procedure	Remove the existing interface bracket. Move the interface board, pushbutton assembly and cable assembly from the old bracket to the new. If the cable with relay (10-4037A) is not installed, use the 2 M3*8 screws and flat washers, and install the Relay from the front of the Interface Bracket. See Operator Interface Assy 50-1522A for more details.
Action required
Prerequisite FCOs
Technical contact	phorak@creo.com
Date submitted	Aug 99
Modified by
Date modified