Home | Contact Us | Submit Troubleshooting Info | Search | Help


    Output | Software Solutions | Proofing | Color, Screening and Calibration | Scanning | Digital Photography | Consumables | POS

Plate hits plate ledge during manual bypass

Applies to
  • Trendsetter Autoloader
Component
  • Manual bypass load
Problem Plate hits plate ledge during manual bypass
Cause Operator door out of adjustment
Solution Adjust rubber bumpers on load table that the operator door rests against.
Technical contact smontague@creo.com
Date submitted April 17, 2000
Date modified

    Copyright © 2005 Creo Inc. All rights reserved. Confidential. Back to top.