Home | Contact Us | Submit Troubleshooting Info | Search | Help


    Output | Software Solutions | Proofing | Color, Screening and Calibration | Scanning | Digital Photography | Consumables | POS

Separator arms timeout moving out

Applies to Trendsetter Autoloader
Component Separator arms
Symptom Error message #15300 - ALE: Separator timed out moving out
Causes and Solutions If the machine is running firmware version 1.20 or newer, this error can only occur during initialization.
  1. Check for the installation of firmware version 1.20 or newer. Install if necessary.
  2. Increase the aldly sio timeout value.
  3. See the description for error  #15300 for additional causes and solutions.
Technical contact Scott Montague
Date submitted February 14, 2000
Date modified

    Copyright © 2005 Creo Inc. All rights reserved. Confidential. Back to top.