Home | Contact Us | Submit Troubleshooting Info | Search | Help
Output | Software Solutions | Proofing | Color, Screening and Calibration | Scanning | Digital Photography | Consumables | POS
Home | Contact Us | Submit Troubleshooting Info | Search | Help
Output | Software Solutions | Proofing | Color, Screening and Calibration | Scanning | Digital Photography | Consumables | POS
|
Full Name |
Type and Part Number |
Description |
Set al: Calibration Variables | |
|---|---|---|---|---|
|
Set Name |
Default |
|||
|
mag_sensor |
reed switch (15-3063) magnet (59-3141) |
Determines if the trailing edge (TE) clamps are on the actuator. |
ms |
1 |
|
roller_sensor |
reed switch (15-3063) magnet (59-3141) |
Checks roller position. Also ensures that the roller is not in the "no fly" zone before spinning the drum. |
rs |
1 |
|
te_lock_sensor |
reed switch (15-3063) magnet (59-3141) |
Senses whether the TE clamps are locked or unlocked before attempting to place them on or remove them from the drum. |
tl |
1 |
|
te_sensor |
reed switch (15-3063) magnet (59-3141) |
Checks position of the Trailing Edge (TE) actuator. Also ensures that the TE actuator is not in the "no fly" zone before spinning the drum. |
te |
1 |
|
le_sensor |
reed switch (15-3063) magnet (59-3141) |
Checks position of the Leading Edge (LE) actuator position. Also ensures that the LE actuator is not in the "no fly" zone before spinning the drum. |
le |
1 |
|
pvac_sensor |
on TEE board (10-3627C) |
Verifies that the picker has successfully grabbed a plate. |
pvs |
1 |
|
uvac_sensor |
on TEE board (10-3627C) |
Verifies that a plate has been successfully grabbed by the unload cups. |
uvs |
1 |
|
pick_up_down_sensor |
optical
Order kit 518-02218A (FCO CA11580) to replace 10-3676A. If FCO is already applied, order 500-03817A for replacement. |
Verifies that the picker up/down actuator has successfully moved to the desired location. |
puds |
1 |
|
pick_in_out_sensor |
optical (10-3676A) |
Verifies that the picker in/out actuator has successfully moved to the desired location. |
pios |
1—enables the picker out (AWAY from the plate stack) sensor) |
|
separator_sensor |
micro switch (15-3135) |
Verifies that the actuator has successfully moved to the desired location. |
ss |
1 |
|
load_plate_sensor |
optical (36-3210)
See FCO E897. Part number changed on FCO E312. See |
Checks if a plate is on the load ramp and verifies the size of the plate as it is loaded. |
lps |
1 |
|
load_ramp_sensor |
reed switch (15-3063) magnet (59-3141) |
Verifies that the load ramp actuators have successfully moved to the desired location. Also ensures that the load ramp is not in the "no fly" zone before spinning the drum. |
lrs |
1—enables the top and bottom load ramp out (AWAY from drum) sensor |
|
unload_table_sensor |
reed switch (15-3063) magnet (59-3141) |
Verifies that the up/down actuator has successfully moved to the desired location. |
uts |
1 |
|
unload_rotate_sensor |
reed switch (15-3063) magnet (59-3141) |
Verifies that the rotator actuator has successfully moved to the desired location. |
urs |
1 |
|
unload_cup_sensor |
reed switch (15-3063) magnet (59-3141) |
Verifies that the up/down actuator has successfully moved to the desired location. |
ucs |
1 |
|
pos_to_rotate_sensor |
optical (10-3683A) |
Verifies that the unload table traveler is in the correct (i.e. safe) location to rotate the plate. |
prs |
1 |
|
plate_eject_sensor |
optical (36-3141) |
Checks if a plate is on the unload table before raising the table. |
pes |
1 |
|
plate_cover_sensor |
OMRON (10-3805A) |
Verifies that the plate cover door on the load table is closed prior to picking a plate. |
pcs |
1 |
|
plate_stack_empty_sensor |
optical (36-3141) |
Verifies that plates are on the load table prior to picking a plate. |
pss |
1 |
