Product

Trendsetter VLF

Component

Balance weights

Error

15961 ALE: Balance weights not detected. Confirm position

Cause

One or both magnetic reed switches mounted on the balance weight actuators does not detect the balance weight.

Solution

• Check for valid 'state al wp1|wp2' parameters (weight position 1|2). Reset to zero and run 'bal find' command. Check the sensors using BAL.
• If a sensor is not working properly, you can mask "al bii" for one job but the machine should not be left in this state.

See also

VLF Engine Balance Weight Sequence

Technical contact(s)

Angus Gillon

Submitted by

Nesho Plavsic

Date submitted

22 Apr 2002