Home | Contact Us | Submit Troubleshooting Info | Search | Help


    Output | Software Solutions | Proofing | Color, Screening and Calibration | Scanning | Digital Photography | Consumables | POS

“DPE orthog slope greater than max.” bug occuring

Applies to
  • Trendsetter 3230
  • Trendsetter 3244
  • VLF Trendsetter

Solutions

 If you get the “DPE orthog slope greater than max.” bug occuring on a Trendsetter, please do the following:
  1. Upgrade the firmware to version 2.12 (Trendsetter 32xx) or 1.13 (VLF Trendsetter)
  2. Install an FDPE kit, part number 10-3762A (which includes the FDPE board and a separate memory module).

The “DPE orthog slope greater than max.” error will now appear as a warning only when verbose is set to 1.

Contact Steve Froese (3657)
Submitted by  
Date June 15, 1998
Reviewed by  

    Copyright © 2005 Creo Inc. All rights reserved. Confidential. Back to top.