Troubleshooting - VLF Trendsetter AL Cart Cover Won't Open/Close

Applies to	VLF Trendsetter AL

Machines affected	All machines that have a Single Cassette Module installed.

Error Number	None

Component	Cassette cart

Problem	The accordion blind cover on the cassette cart won't open and/or close properly.

Causes and Solutions	Cause 1: Glide shoe twisted Solution: Replace the two UHMW glides under the cover bar (part number xx-xxxx) (need photo) Cause 2: Cable has jumped off its guide, or is misaligned Solution: Adjust the screws on the cable spring tensioner. Cause 3: Cable is worn or damaged Solution: Replace the cable (part number xx-xxxx) Cause 4: Cable pulleys are worn or damaged Solution: Replace the pulley (part number xx-xxxx) Cause 5: Cover is damaged. Solution: Replace the cover (part number xx-xxxx)

Causes and Solutions

Cause 1: Glide shoe twisted
Solution: Replace the two UHMW glides under the cover bar (part number xx-xxxx) (need photo)

Cause 2: Cable has jumped off its guide, or is misaligned
Solution: Adjust the screws on the cable spring tensioner.

Cause 3: Cable is worn or damaged
Solution: Replace the cable (part number xx-xxxx)

Cause 4: Cable pulleys are worn or damaged
Solution: Replace the pulley (part number xx-xxxx)

Cause 5: Cover is damaged.
Solution: Replace the cover (part number xx-xxxx)

Cover on cassette cart won't open/close