Home | Contact Us | Submit Troubleshooting Info | Search | Help


    Output | Software Solutions | Proofing | Color, Screening and Calibration | Scanning | Digital Photography | Consumables | POS

Table bumps loudly when lowered

Applies to
  • VLF Trendsetter AL
Machines affected All machines.
Error Number None
Component Table
Problem When the table goes back down after a plate is loaded on the drum, it bumps hard enough against the machihe frame to make a loud noise.
Causes and Solutions Cause:  One of the table dampers on the counterweight may be failing.
Solution:  Check both dampers for signs of leaking oil. If oil is leaking, replace the entire damper assembly.
Technical contact Dal Wagner
Date submitted 18 May 2000
Date modified

    Copyright © 2005 Creo Inc. All rights reserved. Confidential. Back to top.