Home | Contact Us | Submit Troubleshooting Info | Search | Help


    Output | Software Solutions | Proofing | Color, Screening and Calibration | Scanning | Digital Photography | Consumables | POS

Load assembly doesn't drop

Applies to
  • VLF Trendsetter AL
Machines affected All machines.
Error Number None
Component Picker
Problem When the picker is in position to pick a plate, the load assembly doesn't drop down to begin the pick.
Causes and Solutions Cause: The load assembly is damaged, and has jammed. Solution:  Replace the load assembly.
Technical contact Rob Bouchal
Date submitted 29 May 2000
Date modified

    Copyright © 2005 Creo Inc. All rights reserved. Confidential. Back to top.