Picker or S-Conveyor Motor Runs in Reverse


Product		Trendsetter VLF Autoloader

Component		Picker Straight Conveyor

Symptoms		The picker or S-Conveyor motor runs in reverse after cables are replaced.

Cause		The motor pins are not connected in the right order.

Solution		Switch pins 2 and 5 on the connector for the motor (not the pins on the cable connector). See the photos below for the incorrect and correct motor connector wiring.

Photo 1: Motor wired in reverse
Photo 2: Motor wired correctly (the cables in pins 2 and 5 have been switched)

Technical contact(s)		Marek Zgrych
Submitted by		Ted Nivolianitis
Date submitted		04 Apr 2002