Home | Contact Us | Submit Troubleshooting Info | Search | Help


    Output | Software Solutions | Proofing | Color, Screening and Calibration | Scanning | Digital Photography | Consumables | POS

Configure the system

  1. Power up the Trendsetter VLF and the Autoloader.
  2. Power up the workstation.
  3. Verify that the network is configured and the connection is working.

Note: If the network is not responding, contact the applications specialist.

  1. Configure the media following the Setting Up New Thermal Media instructions.
  2. Configure the workstation following the applicable Workstation Software User Guide.
  3. Install the Plate Alignment Labels on the load table. See Plate Alignment Label Placement.
 

    Copyright © 2005 Creo Inc. All rights reserved. Confidential. Back to top.