Product

• Kodak CS Xpose, version 2.x or later
• Kodak^® Prinergy^®, version 2.1, update 12 or later
• Kodak^® Prinergy^® Evo, version 4.0.6.6 or later
• Kodak Dolev^® 800, 800 V, 800 V2, 800 V3, or later

Operating system

• Microsoft^® Windows^® 2000 Server
• Microsoft Windows Server^® 2003

Background

Prinergy contains pre-defined Dolev screen sets for use with Prinergy to Dolev 800 family connectivity. These screen sets are normally hidden to reduce clutter in the Process Template Screen System pop-up menu, and are enabled by editing the Windows registry (Prinergy Connect) or the config.txt file (Prinergy Evo).

The screen sets provide Dolev angle sets familiar to Brisque users and allow for 7.5° angles, which may help reduce moiré on Dolev output. Use of the screen sets also relaxes a memory constraint and allows frequencies very close to the exact frequencies requested. With standard Prinergy screen sets, the memory constraint causes users who request 150 lpi at 2540 dpi resolution to receive a line frequency of about 141 lpi. The Dolev screen angle sets result in a line frequency of almost exactly 150 lpi at 2540 dpi.

Note: The Prinergy Dolev screen sets do not use IS screening. In Prinergy version 4.1 or later, Dolev screen sets are only visible when the AM screen type is selected, not when the IS screen type is selected.

Requirements

You must have one of the following software products, installed and configured:

• Prinergy software, version 2.1, update 12 or later
• Prinergy Evo software, version 4.0.6.6 or later

Procedure

Enable the screen sets in Prinergy by editing the screen_version registry key.

Enable the screen sets in Prinergy Evo by editing the configuration file.

Enabling Dolev screen sets in Prinergy

1. On the Prinergy primary server desktop, select Start > Run.
2. Type regedit and click OK.
3. In the Registry Editor dialog box, locate HKEY_LOCAL_MACHINE\SOFTWARE\Creo\Araxi\Settings\
   Default\SCDV\.
4. Double-click the screen_version key.

If there is no screen_version key, create a new DWORD value called screen_version.
5. In the Value data box, type 2.
6. Click OK.
7. Close the Registry Editor dialog box.
8. Repeat this procedure on every Prinergy secondary or render station that has Printer JTPs running locally.
9. In Prinergy Administrator on the primary server, stop and start all Printer JTPs.

The Dolev screen sets should now be available in Output Process Templates. If they are not visible, restart Process Template Editor. If they are still not visible, delete and then recreate the Output JTPs.

Enabling Dolev screen sets in Prinergy Evo

1. On the Prinergy Evo desktop, locate \\Server\Program Files\Kodak\Prinergy Evo X.x.x\config_data\System\
   common\.
2. Open the config.txt file in a text editor.
3. Add the following line to the file:
   Jasper.SCDV.screen_version=2
4. Stop and start all Printer JTPs.

The Dolev screen sets should now be available in Output Process Templates. If they are not visible, restart Process Template Editor.

Technical contact(s)

Stephen Zmetana

Date submitted

21 Feb 2003