Home | Contact Us | Submit Troubleshooting Info | Search | Help


    Output | Software Solutions | Proofing | Color, Screening and Calibration | Scanning | Digital Photography | Consumables | POS

Diagnostic series plot not working properly

checkbox.gif (459 bytes) Tested     uncheckbox.gif (229 bytes) Not Tested

Applies to

 Print Console 1.0, Early Production release version (build 53)

Problem

 The diagnostic series plots (accessed via the Service Menu) aren’t working properly. The plot starts but doesn’t complete: it goes into limbo.

Cause

 The plot isn’t setting up the correct parameters in the firmware.

Workaround

 To work around this problem, use the diagnostic port to submit series plots instead.

Permanent fix

 n/a
Technical contacts
 Jose Delgado, x2319
Date submitted
 September 10, 1999
Last modified
 September 10, 1999

    Copyright © 2005 Creo Inc. All rights reserved. Confidential. Back to top.