Home | Contact Us | Submit Troubleshooting Info | Search | Help


    Output | Software Solutions | Proofing | Color, Screening and Calibration | Scanning | Digital Photography | Consumables | POS

Can't Disable a Color, Dieline, or Varnish in a Job Submitted by Rampage

  checkbox.gif (459 bytes)  Tested   uncheckbox.gif (229 bytes)  Not Tested

Applies to

 Print Console 1.x and a Rampage 7.4 Workflow

Problem

 Unable to disable a separation in Print Console when a job was sent through a Rampage workflow.

Background

 If you submit a proofing job to Print Console from a Rampage system, you might want to disable one of the separations. For example, if you have C, M, Y, K, Dieline, Pantone 3237, and Intel Blue, but you don't want the Dieline to image. When you disable the Dieline in Print Console, Rampage write the files C, M, Y, K, appears to skip the Dieline, but then adds it again and images it with the piece of donor for Pantone 3237.

Workaround

 Currently there is no workaround except aborting the job before it images the file you do not want imaged.

Permanent Fix

 This is a known limitation in Rampage 7.4 and cannot be worked around in Print Console. Rampage 7.4 (build 54) adds spot color support.
Technical contacts
 Troy Anderson, x4789
Date submitted
 July 17, 2000
Last modified
 July 17, 2000

    Copyright © 2005 Creo Inc. All rights reserved. Confidential. Back to top.