The debris hose is disconnected (error #27012/43012)


Product		Platesetter 3244 ThermoFlex Trendsetter 400/800 Trendsetter Autoloader Trendsetter NEWS Trendsetter Spectrum Trendsetter VLF Trendsetter VLF Autoloader VLF Platesetter

Machines affected		All machines with Firmware 0 or Firmware 1.

Component		UDRC, Debris hose, vacuum line - PACC Monitor

Error		27012/43012: The debris hose is disconnected

Symptoms		There is no flow at the nozzle, but there is flow at the UDRC.

Cause		The debris hose is disconnected or the nozzle sensor tube to the nozzle pressure sensor (in the output device) is not attached or has a hole/kink.

Solution		Cause 1: The debris hose is disconnected. Solution: Check all debris hose connections between the UDRC and the nozzle. Reattach if necessary. Check for large holes in the debris hose. Replace as necessary. Cause 2: The nozzle sensor tube to the nozzle pressure sensor (in the output device) is not attached or has a hole/kink. Solution: Reconnect or replace the sensor tube, making sure that it is connected to the "LOW" port on the Setra brand sensor.

Technical contact(s)		Tony Lamprecht
Submitted by		Ryan Hines
Date submitted		30 Sep 2003