Product

Error

17670: Warning temperature high 50 C

Symptoms

The above error appears.

Cause

• Clogged mesh on Trendsetter 3244
• Blower motor failure

Solution

Wire mesh is clogged

On a 3244 Trendsetter (serial numbers S1 to S65), the overheating can be caused by a clogged wire mesh filter at the end of the flexible hose from the head. The filter is located on the left (fan box) side on the bulkhead where the cabinet moves away from the engine (after pressing the white release button), where the blower mates to the flexible hose that goes to the head.

If this is the case, remove the wire mesh filter as per FCO B624.

Blower motor failure

The blower pulls air from inside the device and through the head. It exhausts outside the device.

Replace the motor.

Technical contact(s)

Jeff Edgar

Submitted by

Steve Froese

Date submitted

03 Apr 2001