Home | Contact Us | Submit Troubleshooting Info | Search | Help
Output | Software Solutions | Proofing | Color, Screening and Calibration | Scanning | Digital Photography | Consumables | POS
Home | Contact Us | Submit Troubleshooting Info | Search | Help
Output | Software Solutions | Proofing | Color, Screening and Calibration | Scanning | Digital Photography | Consumables | POS
mask Results Sample
>>mask
"Carriage power" is masked because the carriage driver has been changed.
"DBlower Filter Fault." is masked because the debris blower is not installed.
Status flags: (! = flag is asserted, * = flag is masked)
0 ALE +12V
1 ABORT switch on
2 Door is open
*3 Reserved
4 ALE -12V
*5 Reserved
*6 Reserved
*7 Carriage power
8 Air Supply Below Threshold
9 HA-BP cbl, Carriage Home/Away
10 CD-D-BP: Carriage Drive Digital
11 CD-A-BP: Carriage Drive Analog
12 CM-CDB: Carriage Drive to Motor
13 Carriage Amp Fault
14 MD-BP: Drum Motor - Backplane
15 Drum Amp Fault
16 TE-BP: Tach Encoder - Backplane
17 EH-BP: Exposure Head - Backplane
*18 Exposure Head power
19 Operator Interface not connected
20 Pushbutton not connected
21 TEE +24V
22 Sensors not connected (J7)
23 Air Valves not connected (J20)
24 LR plate sensor not connected (J3)
25 Fly-off cable not connected (J2)
26 Temp Sensors not connected (J13)
27 AL Air Valves not connected (J21)
28 Picker Sensors not connected (J11)
29 Table Sensors not connected (J6)
30 TEE-AL stepper drive cbl (J17)
31 TEE-AL warning lamp cbl (J24)
32 TEE-AL cover lock cbl (J26)
33 Carriage limit switch
*34 DBlower Filter Fault.