| Variables | index | The copy index from 0 to 3. |
| combination | The TPG combination from 0 to 65535. | |
| name | The combination name ( maximum 40 characters ). | |
| number | The stripe number from 2 to 64. | |
| Description | Configure the number of stripes of the combination data for one of the four TPG combinations that can be implemented by the user. The TPG combination will generate a series of stripes where the stripe pattern and stripe width can be configured by the user. | |
| Typically the monitor command plt combination config <index> <combination> <name> <number> is used to configure the number of stripes of the combination data and then the monitor command plt combination init <index> <stripe> <pattern> <width> is used to initialize each stripe of the combination data. | ||
| This is intended as a development tool and should not be used during normal operation. | ||
| Notes | Thermal 1.0 / 1.7x equivalents: | |
| ||
| Thermal 2 equivalents: | ||
| ||
| Related Documents |
COMMAND: plt mode (image|off) | |
|
COMMAND: plt image (fiber|rs422|synthesizer) (fiber|tpg [<pattern>]) | ||
|
COMMAND: plt pattern config <index> <pattern> <name> <row> <repeat> <column> | ||
|
COMMAND: plt pattern init <index> <row> <nibbles> | ||
|
COMMAND: plt combination init <index> <stripe> <pattern> <width> | ||
|
PARAMETER: plt <copy index> combinationname | ||
|
PARAMETER: plt <copy index> stripenumber | ||
|
PARAMETER: plt <copy index> stripepattern <stripe index> | ||
|
PARAMETER: plt <copy index> stripewidth <stripe index> | ||