| Variables | index | The copy index from 0 to 3. |
| row | The row index from 0 to 15. | |
| nibbles | From 2 to 116 nibbles that configure the pattern data. | |
| Description | Initialize one row of the pattern data for one of the four TPG patterns that can be implemented by the user. The TPG pattern is constructed from pattern data with a maximum of 16 rows and 58 columns. Each row represents one pixel but all rows can be repeated to increase the pattern height. Each column represents eight pixels ( i.e. one byte ) but there are sufficient columns to generate all 464 pixels. | |
| When entering nibbles, the number of nibbles must equal twice the number of columns. Each nibble will initialize four bits of the pattern data ( high bit first, low bit last ). | ||
| Typically the monitor command plt pattern config <index> <pattern> <name> <row> <repeat> <column> is used to configure the dimensions of the pattern data and then the monitor command plt pattern init <index> <row> <nibbles> is used to initialize each row of the pattern data. | ||
| This is intended as a development tool and should not be used during normal operation. | ||
| Notes | Thermal 1.0 / 1.7x equivalents: | |
| ||
| Thermal 2 equivalents: | ||
| ||
| Related Documents |
COMMAND: plt mode (image|off) | |
|
COMMAND: plt image (fiber|rs422|synthesizer) (fiber|tpg [<pattern>]) | ||
|
COMMAND: plt pattern config <index> <pattern> <name> <row> <repeat> <column> | ||
|
COMMAND: plt combination config <index> <combination> <name> <number> | ||
|
COMMAND: plt combination init <index> <stripe> <pattern> <width> | ||
|
PARAMETER: plt <copy index> patternname | ||
|
PARAMETER: plt <copy index> rownumber | ||
|
PARAMETER: plt <copy index> rowrepeat | ||
|
PARAMETER: plt <copy index> columnnumber | ||
|
PARAMETER: plt <copy index> patterndata <data index> | ||