Home | Contact Us | Submit Troubleshooting Info | Search | Help


    Output | Software Solutions | Proofing | Color, Screening and Calibration | Scanning | Digital Photography | Consumables | POS

Thermal 3 Errorcode: [06412] The polarity could not be configured

Error details

Thermal3 Errorcode: [06412] The polarity could not be configured
Thermal3 Errorcode
[06412] The polarity could not be configured

Service Information Performing a beam-balance requires the polarity to be set. This error indicates that the polarity could not be set typically due to a firmware development error.

Operator Action Call service.

Causes
  • Firmware error that will occur during firmware development and testing.

Applies to: THERMAL3
Modified: Wed Jul 16 04:28:29 2008
Updated: Wed Jul 16 04:52:19 2008
Module: BBS

    Copyright © 2005 Creo Inc. All rights reserved. Confidential. Back to top.