Home | Contact Us | Submit Troubleshooting Info | Search | Help


    Output | Software Solutions | Proofing | Color, Screening and Calibration | Scanning | Digital Photography | Consumables | POS

Thermal 3 Errorcode: [07005] The datalink has been corrupted

Error details

Thermal3 Errorcode: [07005] The datalink has been corrupted
Thermal3 Errorcode
[07005] The datalink has been corrupted

Service Information The datalink has been corrupted. The datalink subsystem implements a protocol that verifies the synchronization of the datalink. If the datalink becomes corrupted, the datalink will be re-initialized.

Operator Action Call service.

Causes
  • Intermittent or faulty communication equipment.
  • Firmware error that will occur during firmware development and testing.

Applies to: THERMAL3
Modified: Wed Jul 16 04:28:30 2008
Updated: Wed Jul 16 04:52:18 2008
Module: DTL

    Copyright © 2005 Creo Inc. All rights reserved. Confidential. Back to top.