Thermal 3 Errorcode: [02214] The secondary directory section is corrupt


Service Information	The registry consists of three 128K blocks of flash used as primary, secondary and baseline parameter sections. The primary and secondary sections provide a redundant backup for reading and writing registry keys ( or parameters ) while the baseline section provides a baseline for the registry keys ( or parameters ).
	The status of the primary and secondary parameter sections is determined automatically during initialization and by the monitor command reg verify. If an error is detected in the secondary parameter section, the firmware will attempt to automatically recover using the primary parameter section. This error indicates that recovery was not possible typically due to a flash problem.
Operator Action	Call service.
Causes	Corruption in the secondary parameter section typically due to a flash problem. Number of flash write cycles exceeded.
Related Documents	COMMAND: reg verify [baseline]
	ERRORCODE: [02210] Both directory sections are corrupt
	ERRORCODE: [02211] The primary directory section was recovered
	ERRORCODE: [02212] The primary directory section is corrupt
	ERRORCODE: [02213] The secondary directory section was recovered