Thermal 3 Errorcode: [05609] Failure opening / closing the internal shutter


Service Information	The control of the fast shutter or the beam-balance shutter has failed.
	Due to limitations of the Thermal 1.0 / 1.7x interface, the number of error codes that can be returned to the host are limited. Enabling the error translation level for the system subsystem will display a more specific error.
Operator Action	Call service.
Causes	A beam-balance is in progress. Firmware error that will occur during firmware development and testing.
Related Documents	COMMAND: sys shutter (open\|close)
	COMMAND: act shutter (open\|close)
	COMMAND: bbs shutter (open\|close)
	COMMAND: vbs enable (<subsystem>\|all) <level>