Home | Contact Us | Submit Troubleshooting Info | Search | Help


    Output | Software Solutions | Proofing | Color, Screening and Calibration | Scanning | Digital Photography | Consumables | POS

Thermal 3 Errorcode: [05608] The shutter type / control is invalid

Error details

Thermal3 Errorcode: [05608] The shutter type / control is invalid
Thermal3 Errorcode
[05608] The shutter type / control is invalid

Service Information The monitor command sys shutter (open|close) will control the beam-balance shutter. The beam-balance shutter control can be one of the following:
  • Open
  • Close

Operator Action Verify the previous monitor command and enter a valid beam-balance shutter control.

Causes
  • The beam-balance shutter control is invalid.

Related Documents COMMAND: sys shutter (open|close)

Applies to: THERMAL3
Modified: Wed Jul 16 04:28:39 2008
Updated: Wed Jul 16 04:52:19 2008
Module: SYS

    Copyright © 2005 Creo Inc. All rights reserved. Confidential. Back to top.