Thermal 3 Errorcode: [05658] The write laser standby is in progress

Thermal3 Errorcode: [05658] The write laser standby is in progress

Thermal3 Errorcode


Service Information	After the plot is complete, the host may configure the "Standby" write laser control mode to improve the lifetime of the write laser. This error code indicates that write laser standby is in progress. While the error may be normal, it should be handled internally by the firmware.
Operator Action	Call service.
Causes	Firmware error that will occur during firmware development and testing.
Related Documents	COMMAND: sys laser [on\|standby\|off\|anneal]