Home | Contact Us | Submit Troubleshooting Info | Search | Help


    Output | Software Solutions | Proofing | Color, Screening and Calibration | Scanning | Digital Photography | Consumables | POS

Thermal 3 Errorcode: [05654] The exposure head has been disabled

Error details

Thermal3 Errorcode: [05654] The exposure head has been disabled
Thermal3 Errorcode
[05654] The exposure head has been disabled

Service Information The exposure head has been disabled by either a fatal fault or a monitor command. If you need to look here, you shouldn't be using either the monitor commands or the NVS parameters required to use these features.

Operator Action Reset the exposure head.

Causes
  • The exposure head has been disabled.

Applies to: THERMAL3
Modified: Wed Jul 16 04:28:39 2008
Updated: Wed Jul 16 04:52:16 2008
Module: SYS

    Copyright © 2005 Creo Inc. All rights reserved. Confidential. Back to top.