Thermal 3 Errorcode: [05632] The write laser control mode is in progress


Service Information	The commands implemented by the exposure head are non-blocking. As a result, the command to configure the write laser control mode will only initiate the write laser control mode. The host ( or user ) is required to wait until the write laser control mode is complete before issuing the next command ( affecting the write laser ). This error code indicates that configuration of the write laser control mode is in progress.
	For example, the host ( or user ) will initiate the "On" write laser control mode to turn on the write laser. If successful, the host ( or user ) can poll the write laser state. This error code indicates the "On" write laser control mode is in progress and any other error code indicates the "On" write laser control mode is complete. Once the write laser is on, the host ( or user ) can issue the next command.
	Note that the command to configure the write laser control mode can be aborted when requested by the host ( or user ) or when required by the fault handler.
Operator Action	Wait for completion of the write laser control mode.
Causes	The write laser control mode is in progress.
Related Documents	COMMAND: sys laser state
	COMMAND: sys laser [on\|standby\|off\|anneal]