Home | Contact Us | Submit Troubleshooting Info | Search | Help


    Output | Software Solutions | Proofing | Color, Screening and Calibration | Scanning | Digital Photography | Consumables | POS

Thermal 3 Errorcode: [05635] Timeout waiting for the write laser

Error details

Thermal3 Errorcode: [05635] Timeout waiting for the write laser
Thermal3 Errorcode
[05635] Timeout waiting for the write laser

Service Information The commands implemented by the exposure head are non-blocking. As a result, the command to configure the write laser control mode will only initiate the write laser control mode. This error code indicates a timeout waiting for the configuration of the write laser control mode.

Operator Action Call service.

Causes
  • The beam-pointing and / or write laser diode has not settled.

Related Documents COMMAND: sys laser state
COMMAND: sys laser [on|standby|off|anneal]

Applies to: THERMAL3
Modified: Wed Jul 16 04:28:39 2008
Updated: Wed Jul 16 04:52:19 2008
Module: SYS

    Copyright © 2005 Creo Inc. All rights reserved. Confidential. Back to top.