| Description | The proportional gain for the PID controller for laser A. Changes to this parameter take affect when the control mode of the beam-pointing driver is set to "On". If the control mode of the beam-pointing driver is already "On", then this parameter takes affect immediately. | |
| Note that this parameter is automatically calibrated by the monitor commands bpd setup [(a|b)] and bpd tune [(a|b|c)]. | ||
| Type | Real | |
| Default Value | 0.1 V/um | |
| Range | -10.0 to 10.0 V/um | |
| Related Documents |
COMMAND: bpd setup [(a|b)] | |
|
COMMAND: bpd tune [(a|b|c)] | ||
|
PARAMETER: bpd aki | ||
|
PARAMETER: bpd ab | ||