| Variables | media index | Selects the media index from 0 to 63. |
| polarity | Selects the polarity from 0 to 1 ( 0 is high, 1 is low ). | |
| Description | The beam slope defined by the copy of the media parameters where the copy is selected by the media index. When performing a beam-balance, the beam slope specifies the target profile slope. | |
| The beam-balance algorithm will adjust the stroke values to create a linear relationship between the pixel power and the pixel number. The value of the slope specifies the difference between the pixel power at the edges of the swath expressed as a percentage of the maximum pixel power. | ||
| Type | Real | |
| Default Value | 0.000 % | |
| Range | -50.000 to 50.000 % | |
| Related Documents |
COMMAND: bbs balance | |
|
PARAMETER: med <media index> beamcurve <polarity> | ||
|
PARAMETER: med <media index> beampiston | ||
|
PARAMETER: med <media index> stroke <polarity / spot quad> | ||
|
PARAMETER: med <media index> scorr <polarity / spot quad> | ||