Home | Contact Us | Submit Troubleshooting Info | Search | Help
Output | Software Solutions | Proofing | Color, Screening and Calibration | Scanning | Digital Photography | Consumables | POS
Home | Contact Us | Submit Troubleshooting Info | Search | Help
Output | Software Solutions | Proofing | Color, Screening and Calibration | Scanning | Digital Photography | Consumables | POS
There is no need to install Statilyzer 2.0., simply go to the Statilyzer 2.0 Web site. Click Statilyzer 2.0 then click Creo>Output Devices>Statilyzer.
Install Statilyzer 1.0 for any device that is not available in Statilyzer 2.0 or in situations where you have no access to the Internet. For instructions on how to download and use Statilyzer 1.0, send an e-mail request to OD Service Tools Support.