Ripro Server Troubleshooting
TCP/IP Communication

TCP/IP communication does not work (including MacX)

Recommended Solution

1. Check TCP/IP parameters, use “smit tcpip” , “host <hostname>“, “more /etc/hosts”.
2. Redefine the “enX” driver (i.e. en0, en1 etc.).
3. Type “smit tcpip”
4. Select “Further configuration”. Select “Network Interfaces”. Select “Network
   Interface Selection”. Select “Remove a Network Interface” and select the specific driver to be removed.
5. In the ‘Network Interface Selection’ menu select “Add a Network Interface”.
6. Select “Add a Standard Ethernet Network Interface” and add the driver.
7. Reconfigure TCP/IP parameters using “smit tcpip”.