EverSmart DOT & Brisque Versions

Home | Contact Us | Submit Troubleshooting Info | Search | Help

EverSmart DOT & Brisque Version Support Testing

Y. Ben Dor
29 November 1998

General recommendation:

It is recommended to use 128MB memory on the Brisque station while using the EverSmart DOT workflow
(all these tests were done with this configuration).

All Brisque platform based on 43P and F50 are with 128MB per CPU.

Only Brisque platform based on E30 were manufactured with 96MB. If no U/G was done on these stations, then the P/N is 510K50732 - Upgrade 32MB for E-30 (DIMMS).

Testing EverSmartDOT V2.0.0 On Brisque ( V 2.2.79 & 2.8.50)

Format	Ps Mode	Support in version 2.2.79	Support in Version 2.8.50
PS Image 4 Separations only	Composite	OK	OK
PS Image 4 Separations only	Pre Separated	OK	OK
DCS 1 4 Separations only	Composite	OK	OK
DCS 1 4 Separations only	Pre Separated	OK	OK
DCS 2 More then 4 separations **	Composite	FAILED	OK
DCS 2 More then 4 separations **	Pre Separated	FAILED	OK
DCS 2 less Then 4 Separations. *	Composite	FAILED	OK
DCS 2 less Then 4 Separations. *	Pre Separated	FAILED	OK
NLW / LWHS		OK	OK

Notes:

DCS!1, DCS2, Ps image support compress (CCITT- G4) and uncompress.
** ----> Up to 8 separations only.
* ----> Create black separation with out data ( only when scanning separations C,M,Y)