Home | Contact Us | Submit Troubleshooting Info | Search | Help
Output | Software Solutions | Proofing | Color, Screening and Calibration | Scanning | Digital Photography | Consumables | POS
Home | Contact Us | Submit Troubleshooting Info | Search | Help
Output | Software Solutions | Proofing | Color, Screening and Calibration | Scanning | Digital Photography | Consumables | POS
The new Brisque External Tower is based on the 4-bay FORTRATM Desktop
enclosure, which supports single-ended and Ultra2 (LVD) SCSI disks, and can be
connected to single-ended SCSI or Ultra2 (LVD) SCSI bus.
The enclosure is supplied with one (1) 73GB drive installed. Optionally, up
to three (3) additional 73GB single connector (SCA) drives can be installed.
The enclosure is easy to install and maintain on-site. The power supply and
all drives are inserted from the front of the unit and plugged into the
connectors on the passive backplane.
Since the Brisque application does not support removable disk drives, it is
not allowed to move drives from one tower to another.
Note: The new 73GB drives SCA are not suitable for the old tower and any
Brisque.
The new External Tower can be installed on Brisque with version 3.0.38 + Upd3 Option2.
To install the tower on a Brisque, please refer to the attached
installation guide, the document is also supplied with the Tower.
The installation kit contain diskette with the new disk driver that need to
be installed on Brisque with AIX 4.21 only.
Notes: For disks slot locations and SCSI IDs, please refer to the
Creoscitex document ONLY (also attached).
For initial order: 501R49400
- BRISQUE EXT. TOWER 73GB SCA
includes: 501S4L086
- BRISQUE EXTERNAL TOWER 73GB SC
For additional drives: 501R49401
- ADD 73GB DISK FOR EX.TOWER SCA
includes: 607A20350
- 73GB USCSI160 SCA 10K DISK (up
to 3 additional disks)
Note: The old tower is no longer
available for new sales.
Attached please find the Brisque Installation notes 399Z1P527A
The Tower is supplied also with the original FORTRATM Installation Guide.