Home | Contact Us | Submit Troubleshooting Info | Search | Help


    Output | Software Solutions | Proofing | Color, Screening and Calibration | Scanning | Digital Photography | Consumables | POS

Turbo Screening Processor (TSP) board locations in Lotem Quantum

On F50:

Slots lsdev* TSP cable
#5 nsp0 TSP1
#6 nsp1 TSP2

On 6F1:

Slots lsdev* TSP cable
#7 nsp0 TSP1
#11 nsp1 TSP2

On 44P-170:

Slots lsdev* TSP cable
#4 nsp0 TSP1
#5 nsp1 TSP2
*Checking the right slot configuration
  1. To check the right slot configuration on the Brisque, use the command lsdev or run SciSmit:
    1. Select Information > Platform Information.
    2. Scroll down to see the results.
  2. If nsp0 and nsp1 are swapped, type:
    # rmdev -l tsp0 -d and press Enter
    # rmdev -l tsp1 -d and press Enter
    # cfgmgr and press Enter
  3. Check again in SciSmit to ensure that the settings are no longer reversed.

    Copyright © 2005 Creo Inc. All rights reserved. Confidential. Back to top.