Home | Contact Us | Submit Troubleshooting Info | Search | Help


    Output | Software Solutions | Proofing | Color, Screening and Calibration | Scanning | Digital Photography | Consumables | POS

The monitor signal is out of range on the Brisque 4.0

Product

  
  • Brisque 4.0
  • Brisque Serve

Platform

  
  • E30 - Victory
  • 43P-140 - Tiger1
  • 43P-150 - Tiger2
  • F50 - Wildcat (2 and 4 CPUs)
  • 44P-170 - Hammerhead
  • 6F1 - Condor (2,4 and 6 CPUs)

Operating system

  

IBM AIX 4.3.3

Error

  

“No Signal or Out Off Range” 

Symptoms

   The above error message appears on the monitor or a black screen appears when logging in to the Brisque after a Cold Start.

Solution

   You must change the resolution of the graphics adapter to: 1024x768@75hz, or select Default.
To change the resolution:
  1. Open the selection window: # smit > Devices > Graphic Displays.
  2. Select Display Resolution and Refresh Rate.
  3. Select:
    #

    4. mgxx
    Available xx-xx
    GXTxxx Graphics Adapter

  1. Select the Display Resolution and Refresh Rate.
  2. Press F4 to change the resolution to Default or to 1024x768@75Hz.
  3. Click OK.
If the problem still remains:
  1. Open the selection window: #smit > Devices > Graphic Displays.
  2. Select Display Type.
  3. Select: Vesa or Other_Vesa.
  4. Click OK.
  5. Press F3 twice to go back.
  6. Select Display Resolution and Refresh Rate.
  7. Select:

    8. #
    mgxx
    Available xx-xx
    GXTxxx Graphics Adapter

  1. Select Display Resolution and Refresh Rate.
  2. Press F4 and change the Resolution to:

    3. 1024x768@75Hz.

  1. Click OK.
Technical contact(s)
  

Meir Zackri
Submitted by
  

Meir Zackri
Date submitted
  

10 Feb 2002

    Copyright © 2005 Creo Inc. All rights reserved. Confidential. Back to top.