Home | Contact Us | Submit Troubleshooting Info | Search | Help


    Output | Software Solutions | Proofing | Color, Screening and Calibration | Scanning | Digital Photography | Consumables | POS

Brisque 4.1 supports a single DeviceLink profile created from two DeviceLink profiles

This document describes how to use a single DeviceLink profile that was created in Profile Wizard software by linking two DeviceLink profiles together.

Product

   Brisque 4.1

Platform

  
  • E30—Victory
  • 43P-140—Tiger1
  • 43P-150—Tiger2
  • 44P-170—Hammerhead
  • F50—Wildcat (2 and 4 CPUs)
  • 6F1—Condor (2, 4, and 6 CPUs)

Operating system

   IBM® AIX 4.2.1 or IBM AIX 4.3.3
  1. In Profile Wizard software, create a single DeviceLink profile from two DeviceLink profiles.
  2. From the Macintosh®, copy the single DeviceLink profile to the Brisque ICC shared folder.
  3. From Brisque, launch the Proof, Improof, Trendsetter Spectrum® or Color2Disk software.
  4. Select the ICC Profiles check box. The Params button becomes active.
  5. Click the Params button.
  6. From the ICC Profiles dialog box, select the Device Link Profile list box, and then select the DeviceLink profile you copied.
  7. Submit the job.
Technical contact(s)
  

Dov Vainer
Submitted by
  

Debbie Enacab
Date submitted
  

12 Jan 2002

    Copyright © 2005 Creo Inc. All rights reserved. Confidential. Back to top.