Many retracing occurrences when exposing from Brisque to a Trendsetter MPE platesetter


Product		Brisque 5.x software Brisque 4.x software Trendsetter platesetter
Platform		All Brisque 4.x and 5.x platforms
Operating system		IBM AIX 4.3.3 and 5.2

Symptoms		After a Brisque 4.x or 5.x cold start or after migrating from Brisque 4.x to Brisque 5.x, there are many retracing occurrences during the expose process on the Trendsetter MPE platesetter.

Cause		Configuration settings on the SCSI board revert to their default values after a Brisque cold start or after migrating to Brisque 5.x.

Solution		To reduce the number of retracing occurrences: On the Brisque server, select smit > Devices > SCSI Adapter > ChangeShow Characteristics of a SCSI Adapter. Select the SCSI board that is connected to the platesetter. Change the settings of the following SCSI parameters: Set `Ultra speed on SE bus with external cable` to `enable`. Set `Apply change to DATABASE only` to `Yes`. Reboot the Brisque workstation.

Technical contact(s)		Dov Vainer
Submitted by		Thom Chadwick
Date submitted		03 Aug 2006