Home | Contact Us | Submit Troubleshooting Info | Search | Help
Output | Software Solutions | Proofing | Color, Screening and Calibration | Scanning | Digital Photography | Consumables | POS
Home | Contact Us | Submit Troubleshooting Info | Search | Help
Output | Software Solutions | Proofing | Color, Screening and Calibration | Scanning | Digital Photography | Consumables | POS
|
|
||
Product |
Prinergy Connect 2.1 ; Prinergy Direct 2.1 ; Prinergy Access 2.1 ; Prinergy Powerpack 2.1 | |
Platform |
||
Operating system |
||
|
|
||
Error |
When opening a Final Output PP with punch settings in ProcessPlan Editor of Prinergy 2.1, the following warning comes up: - The current Punch in parameter "CPC_Punches" named "None" is not available. - The currently selected JTP may not offer the Punch "None". - If you save the Process Plan containing the Punch "None" it will be unusable unless a Punch of this name is available. Otherwise, select an available Punch from the dropdown list. |
|
|
|
||
Symptoms |
The ProcessPlans can be used as they are after the update without any problems. The warning only shows up when you open the PP in the ProcessPlan Editor. |
|
|
|
||
Cause |
In Prinergy 2.0 the default parameter for "no punch" was "None" In Prinergy 2.1 the default parameter for "no punch" is "NONE" |
|
|
|
||
Solution |
Open the PP, go to the Layout section and change the punch setting from None to NONE. Save the PP. Do this for every FinalOutput PP to avoid future warnings. Permanent fix: |
|
|
|
||
See also |
||
|
|
||
Keywords |
install, pped, process plans |
|
|
|
||
Technical contact(s) |
||
Submitted by |
Christoph Koerner |
|
Date submitted |
29 May 2002 |
|