Home | Contact Us | Submit Troubleshooting Info | Search | Help
Output | Software Solutions | Proofing | Color, Screening and Calibration | Scanning | Digital Photography | Consumables | POS
Home | Contact Us | Submit Troubleshooting Info | Search | Help
Output | Software Solutions | Proofing | Color, Screening and Calibration | Scanning | Digital Photography | Consumables | POS
|
|
||
Product |
Prinergy Connect 2.0 ; Prinergy Direct 2.0 ; Prinergy Access 2.0 ; Prinergy PowerPack 1.0 ; Prinergy Connect 2.1 ; Prinergy Direct 2.1 ; Prinergy Access 2.1 ; Prinergy Powerpack 2.1 | |
Platform |
||
Operating system |
||
|
|
||
Error |
||
|
|
||
Symptoms |
I used to be able to select 133 LPI at 1200 DPI. After upgrading past Prinergy 2.0.7.19, I cannot do so. |
|
|
|
||
Cause |
||
|
|
||
Solution |
There are visual problems with 133 LPI at 1200 DPI, since mathematically it cannot really be done cleanly. Because there were problems noticed with this combination (133 LPI at 1200 DPI), Prinergy removed that possiblity from Workshop. The next nearest LPIs that work at 1200 DPI are 120 or 141 LPI. Permanent fix: |
|
|
|
||
See also |
||
|
|
||
Keywords |
screening |
|
|
|
||
Technical contact(s) |
James Bredenhof |
|
Submitted by |
James Bredenhof |
|
Date submitted |
21 Nov 2002 |
|