Home | Contact Us | Submit Troubleshooting Info | Search | Help
Output | Software Solutions | Proofing | Color, Screening and Calibration | Scanning | Digital Photography | Consumables | POS
Home | Contact Us | Submit Troubleshooting Info | Search | Help
Output | Software Solutions | Proofing | Color, Screening and Calibration | Scanning | Digital Photography | Consumables | POS
|
|
||
Product |
Prinergy 1.1; Prinergy Connect 2.0 ; Prinergy Access 2.0 ; Prinergy PowerPack 1.0 ; Prinergy Connect 2.1 ; Prinergy Access 2.1 ; Prinergy Powerpack 2.1 ; Prinergy Satellite | |
Platform |
||
Operating system |
||
|
|
||
Error |
||
|
|
||
Symptoms |
||
|
|
||
Cause |
||
|
|
||
Solution |
The Advanced version of the trapper contains all the features found in the Basic version. However, the Advanced version also contains the following features: - Trap geometry control: bevel/round/mitred line joins; mitred corners and/or clipped chokes on three color joins. - The ability to edit the trap paths, using the Pen tool. - Keepaway mode for building reverse (knockout) traps. Required for dry-offset and printing on non-paper substrates. - Trap Trimming as of Prinergy 2.3.1.2 Permanent fix: |
|
|
|
||
See also |
||
|
|
||
Keywords |
trapping |
|
|
|
||
Technical contact(s) |
Rob Morgan |
|
Submitted by |
Gordon Miller |
|
Date submitted |
10 Oct 2001 |
|