Home | Contact Us | Submit Troubleshooting Info | Search | Help
Output | Software Solutions | Proofing | Color, Screening and Calibration | Scanning | Digital Photography | Consumables | POS
Home | Contact Us | Submit Troubleshooting Info | Search | Help
Output | Software Solutions | Proofing | Color, Screening and Calibration | Scanning | Digital Photography | Consumables | POS
|
|
||
Product |
Prinergy 1.0; Prinergy 1.1 | |
Platform |
||
Operating system |
||
|
|
||
Error |
||
|
|
||
Symptoms |
A process (such as a JTP) dies, but DIAG doesn't give much clue as to why the process died. |
|
|
|
||
Cause |
If the cause of death is a failed precondition or assertion in a low-level package that can't use DIAG, the message regarding the failure gets output to the NT Application Event Log. | |
|
|
||
Solution |
Check the NT Application Event Log. Permanent fix: |
|
|
|
||
See also |
||
|
|
||
Keywords |
diagview |
|
|
|
||
Technical contact(s) |
Simon Chen |
|
Submitted by |
||
Date submitted |
||