Home | Contact Us | Submit Troubleshooting Info | Search | Help
Output | Software Solutions | Proofing | Color, Screening and Calibration | Scanning | Digital Photography | Consumables | POS
Home | Contact Us | Submit Troubleshooting Info | Search | Help
Output | Software Solutions | Proofing | Color, Screening and Calibration | Scanning | Digital Photography | Consumables | POS
|
|
||
Product |
Prinergy Connect 2.0 | |
Platform |
||
Operating system |
||
|
|
||
Error |
||
|
|
||
Symptoms |
There is a mismatch between the front-side and back-side of the impositions. |
|
|
|
||
Cause |
The amount of manual offset that needs to be applied depends on the plate size encoded in the Job Ticket by the imposition software (SignaStation or Preps) that has been applied to the signature that has been printed. | |
|
|
||
Solution |
Run a series of outputs on the double-sided device to determine the amount of manual offset. Then enter these values in the process plan. Positive and negative values are allowed. Permanent fix: |
|
|
|
||
See also |
||
|
|
||
Keywords |
imposition [layout], proofing |
|
|
|
||
Technical contact(s) |
Rob Prior |
|
Submitted by |
||
Date submitted |
||