Home | Contact Us | Submit Troubleshooting Info | Search | Help
Output | Software Solutions | Proofing | Color, Screening and Calibration | Scanning | Digital Photography | Consumables | POS
Home | Contact Us | Submit Troubleshooting Info | Search | Help
Output | Software Solutions | Proofing | Color, Screening and Calibration | Scanning | Digital Photography | Consumables | POS
|
|
||
Product |
Prinergy Connect 2.0 ; Prinergy Direct 2.0 ; Prinergy PowerPack 1.0 ; Prinergy Satellite | |
Platform |
Server: Dell all; Client: PC or Macintosh |
|
Operating system |
Server: Windows 2000; Client: Windows or Macintosh |
|
|
|
||
Error |
||
|
|
||
Symptoms |
CEPS JTP will create a PDF page with a 0,0 LW offset from a CT/LW page with a non-zero LW offset. |
|
|
|
||
Cause |
A CT/LW page has an assign file that specifies the locations of the various components. Normally, the offset location of the LW file is 0,0. If the file's offset has been altered or if an application changes the offset location to something other than 0,0, the CEPS JTP ignores the change. LW offset in final PDF will always be 0,0, regardless of the offset in the assign file. Note: the Brisque does not create LW with offsets other than 0,0. |
|
|
|
||
Solution |
Use a third party application such as CEPSLink to create DCS files from the pages and then process in Prinergy. Permanent fix: |
|
|
|
||
See also |
||
|
|
||
Keywords |
CT-LW Import, Geometry |
|
|
|
||
Technical contact(s) |
James Bredenhof |
|
Submitted by |
James Bredenhof |
|
Date submitted |
12 Mar 2001 |
|